Lighting Design: If LED strips are to be installed, a light trough must be pre-reserved, with a recommended edge width of 15mm. LED strips are not recommended for wet areas; they can be installed in dry areas as needed.
Functional Accessories: Depending on the usage scenario, drawers, glass doors, or adjustable shelves can be added to enhance the practicality and display effect of the stainless steel niche.
Special Location Treatment: If the stainless steel niche is against a wall or extends to the ceiling, the manufacturer must be informed in advance so that the edge of the niche can be designed.
Implementation Conditions: The wall thickness must be greater than 30cm. Even a wall thickness of only 27cm is acceptable. The recommended niche depth is 15-20cm. If the thickness is too shallow, the niche has no practical value; if it is too deep, the product lacks aesthetic appeal.
Proportion Harmony: Consider the size of the stainless steel niche and the proportions of the bathroom walls. Generally, the most practical location is on the left or right side of the washbasin, but this should not be designed as a large size. When designing a niche above a washbasin, the actual groove size must be 5-10cm larger than the tile setter's work to avoid interfering with the tile setter's work. The specific dimensions of the niche need to be based on the tiles you choose; the actual size should be a positive multiple of the tile size and should not be zero-degree off.
45-degree corner design: For bathroom recessed stainless steel niches, it's best to use a 45-degree contact angle design on all four sides. Avoid using external corner trim to showcase the niche's best effect.
